Qnubu Rosin – heat press 1 t 6x12 cm
Rosin press with 1 tonne of pressure, plate size: 6x12 cm, power 700 W
Qnubu Rosin – heat press 1 t 6x12 cm
- A very handy, portable press with a pressing capacity of 1000 kg. Ideal for those getting started with extractions for medicinal use.
The Qnubu Press Bolt 1T is a practical portable press for extracting your favourite flowers at home. The combination of pressure and temperature releases the resin and essential oils and separates them from the plant mass without any risk and without the use of hazardous chemical solvents.
Quickly and easily, your extraction is ready in a few minutes, with no further steps required.
Use
- Connect the unit to the mains and press the press's power switch.
- Set the desired temperature and time parameters
- Wait for the thermostat to reach the set temperature.
- Place the correctly packed plant material between the plates.
- Lower the pressure lever and press the timer button.
- Wait for the countdown to finish. The press gives an audible signal: open it and remove the pressed material.
Specifications
- Manual operation
- Plug-and-play system
- Pressure: 1000 kg – 1 tonne
- Plate size: 6 x 12 cm
- Dual temperature control (0-250 ºC)
- Timer 0-999 sec. with audible alert
- 220 V, European plug
- Dimensions: 19.5 x 13 x 40 cm (length x width x height)
- Weight: 5.4 kg
- Power: 700 W
- Consumption: 700 W/h
- Current: 3.5 A
- Frequency: 50 Hz
Product video
Rosin press with 1 tonne of pressure, plate size: 6x12 cm, power 700 W
Qnubu Rosin – heat press 1 t 6x12 cm
- A very handy, portable press with a pressing capacity of 1000 kg. Ideal for those getting started with extractions for medicinal use.
The Qnubu Press Bolt 1T is a practical portable press for extracting your favourite flowers at home. The combination of pressure and temperature releases the resin and essential oils and separates them from the plant mass without any risk and without the use of hazardous chemical solvents.
Quickly and easily, your extraction is ready in a few minutes, with no further steps required.
Use
- Connect the unit to the mains and press the press's power switch.
- Set the desired temperature and time parameters
- Wait for the thermostat to reach the set temperature.
- Place the correctly packed plant material between the plates.
- Lower the pressure lever and press the timer button.
- Wait for the countdown to finish. The press gives an audible signal: open it and remove the pressed material.
Specifications
- Manual operation
- Plug-and-play system
- Pressure: 1000 kg – 1 tonne
- Plate size: 6 x 12 cm
- Dual temperature control (0-250 ºC)
- Timer 0-999 sec. with audible alert
- 220 V, European plug
- Dimensions: 19.5 x 13 x 40 cm (length x width x height)
- Weight: 5.4 kg
- Power: 700 W
- Consumption: 700 W/h
- Current: 3.5 A
- Frequency: 50 Hz
