Bluelab Guardian Monitor Wi-Fi (WLAN)
pH/EC/temp. probes included, large display, 12 V power supply
Bluelab Guardian Wi-Fi (WLAN)
- Always connected. Presence optional.
Monitoring
Monitor the pH, conductivity and temperature of your reservoir with alerts on your phone using the Bluelab Guardian Monitor with built-in Wi-Fi.
- Built-in WLAN (can be switched off)
- Alarms for high/low pH, temperature and conductivity
- Non-volatile memory – settings are kept even during a power cut
- Plant-safe green LEDs with adjustable display brightness
- Probe cables 2 metres / 6.6 feet long
- 110 – 240 VAC (mains powered)
- Interchangeable power plug
- Replaceable Bluelab pH probe (with BNC connector)
With connection to the Edenic by Bluelab app
- Instant alarm notifications on your phone
- Remote monitoring and control
- Historical reports to support data-driven decisions
- Bluelab Guardian Monitor Inline Wi-Fi now available
Monitor your most important parameters around the clock
- Save time and effort with the Guardian Monitor Wi-Fi
The Bluelab Guardian Monitor Wi-Fi shows you at a glance all three key parameters for successful growth: pH, conductivity and temperature. Thanks to the built-in WLAN function, when activated, the Bluelab Guardian Monitor Wi-Fi can display the data in Edenic. This way you always have your nutrient levels under control, wherever you are.
The Bluelab Guardian Monitor Wi-Fi continuously displays the values of the nutrient solution and lets you optimise these key parameters throughout the individual growth stages of your plants.
Tested and trusted by growers
- Highly visible, bright and always on
On the large, backlit, plant-safe LED display of the Bluelab Guardian Monitor Wi-Fi you can read pH, EC and temperature at a glance.
You can also set discreet visual alarms for your desired parameter ranges. These alert you when the parameters move outside the permitted range. This gives you a complete overview of the condition of your reservoir at all times.
The Bluelab Guardian Monitor Wi-Fi is mains powered and is mounted on a wall or hung from a stand. The two probes are immersed in the reservoir.
Your most important parameters – at a glance
- Maintaining the Bluelab Guardian Monitor Wi-Fi
While conductivity and temperature need no calibration, the meter's pH probe must be calibrated regularly. The Bluelab Probe Care Kit gives you everything you need to clean, maintain and calibrate the probes.
- Stay connected to your parameters
The Bluelab Guardian Monitor Wi-Fi alerts you on your mobile via the Edenic software. If something is wrong in the nutrient reservoir, you will know immediately. Thanks to two-way communication, you can update the alarm settings comfortably from your armchair. This gives you the certainty that your plants are well protected.
- Developed for growers
All Bluelab products are made in New Zealand together with growers, for growers. This means your water-resistant Bluelab Guardian Monitor Wi-Fi withstands the splashes that occur in everyday growing. Designed and assembled in New Zealand from local and imported components.
Benefits
- Compatible with the Edenic by Bluelab app: remote monitoring, historical reports and instant alarm notifications in an intuitive app. Manage your growing environment wherever and whenever you like.
- pH measurement: the Bluelab pH probe has a double junction and is replaceable thanks to the BNC connector. Reliable, accurate readings with a simple 2-point calibration.
- Conductivity and temperature measurement: conductivity is displayed in EC/CF, TDS (ppm 500) and ppm 700. Temperature is displayed in °C or °F.
Specifications
- Automatic temperature compensation: yes, if the conductivity probe is in the same solution as the pH probe.
- Operating environment: 0 – 50 °C / 32 – 122 °F
- Measuring resolution: 0.1 pH, 0.1 EC, 1 CF, 10 TDS, 10 ppm, 1 °C / 1 °F
- Measuring range: 0.0 - 14.0 pH, 0 - 5.0 EC, 0 - 50 CF, 0 - 2500 TDS (EC x 500), 0 - 3500 ppm (EC x 700), 0 - 50 °C, 32 - 122 °F
- Measuring accuracy: ± 0.1 pH, ± 0.1 EC, ± 1 CF, ± 50 TDS, ± 70 ppm, ± 1 °C / ± 2 °F
- Calibration: not required for conductivity or temperature. pH requires a two-point calibration: pH 7.0 & pH 4.0 or pH 10.0.
- Power supply: international power adapter, input 100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A. With interchangeable plugs type A (USA), C (Europe), G (UK), I (NZ). Replacement power adapter available separately.
- CE compliance: yes.
- FCC compliance: yes.
- RoHS compliance: yes.
- Other specifications: 2.4 GHz WLAN connection, WLAN protocol 802.11 b/g/n.
- Warranty: 2 years.
- Country of origin: New Zealand.
pH/EC/temp. probes included, large display, 12 V power supply
Bluelab Guardian Wi-Fi (WLAN)
- Always connected. Presence optional.
Monitoring
Monitor the pH, conductivity and temperature of your reservoir with alerts on your phone using the Bluelab Guardian Monitor with built-in Wi-Fi.
- Built-in WLAN (can be switched off)
- Alarms for high/low pH, temperature and conductivity
- Non-volatile memory – settings are kept even during a power cut
- Plant-safe green LEDs with adjustable display brightness
- Probe cables 2 metres / 6.6 feet long
- 110 – 240 VAC (mains powered)
- Interchangeable power plug
- Replaceable Bluelab pH probe (with BNC connector)
With connection to the Edenic by Bluelab app
- Instant alarm notifications on your phone
- Remote monitoring and control
- Historical reports to support data-driven decisions
- Bluelab Guardian Monitor Inline Wi-Fi now available
Monitor your most important parameters around the clock
- Save time and effort with the Guardian Monitor Wi-Fi
The Bluelab Guardian Monitor Wi-Fi shows you at a glance all three key parameters for successful growth: pH, conductivity and temperature. Thanks to the built-in WLAN function, when activated, the Bluelab Guardian Monitor Wi-Fi can display the data in Edenic. This way you always have your nutrient levels under control, wherever you are.
The Bluelab Guardian Monitor Wi-Fi continuously displays the values of the nutrient solution and lets you optimise these key parameters throughout the individual growth stages of your plants.
Tested and trusted by growers
- Highly visible, bright and always on
On the large, backlit, plant-safe LED display of the Bluelab Guardian Monitor Wi-Fi you can read pH, EC and temperature at a glance.
You can also set discreet visual alarms for your desired parameter ranges. These alert you when the parameters move outside the permitted range. This gives you a complete overview of the condition of your reservoir at all times.
The Bluelab Guardian Monitor Wi-Fi is mains powered and is mounted on a wall or hung from a stand. The two probes are immersed in the reservoir.
Your most important parameters – at a glance
- Maintaining the Bluelab Guardian Monitor Wi-Fi
While conductivity and temperature need no calibration, the meter's pH probe must be calibrated regularly. The Bluelab Probe Care Kit gives you everything you need to clean, maintain and calibrate the probes.
- Stay connected to your parameters
The Bluelab Guardian Monitor Wi-Fi alerts you on your mobile via the Edenic software. If something is wrong in the nutrient reservoir, you will know immediately. Thanks to two-way communication, you can update the alarm settings comfortably from your armchair. This gives you the certainty that your plants are well protected.
- Developed for growers
All Bluelab products are made in New Zealand together with growers, for growers. This means your water-resistant Bluelab Guardian Monitor Wi-Fi withstands the splashes that occur in everyday growing. Designed and assembled in New Zealand from local and imported components.
Benefits
- Compatible with the Edenic by Bluelab app: remote monitoring, historical reports and instant alarm notifications in an intuitive app. Manage your growing environment wherever and whenever you like.
- pH measurement: the Bluelab pH probe has a double junction and is replaceable thanks to the BNC connector. Reliable, accurate readings with a simple 2-point calibration.
- Conductivity and temperature measurement: conductivity is displayed in EC/CF, TDS (ppm 500) and ppm 700. Temperature is displayed in °C or °F.
Specifications
- Automatic temperature compensation: yes, if the conductivity probe is in the same solution as the pH probe.
- Operating environment: 0 – 50 °C / 32 – 122 °F
- Measuring resolution: 0.1 pH, 0.1 EC, 1 CF, 10 TDS, 10 ppm, 1 °C / 1 °F
- Measuring range: 0.0 - 14.0 pH, 0 - 5.0 EC, 0 - 50 CF, 0 - 2500 TDS (EC x 500), 0 - 3500 ppm (EC x 700), 0 - 50 °C, 32 - 122 °F
- Measuring accuracy: ± 0.1 pH, ± 0.1 EC, ± 1 CF, ± 50 TDS, ± 70 ppm, ± 1 °C / ± 2 °F
- Calibration: not required for conductivity or temperature. pH requires a two-point calibration: pH 7.0 & pH 4.0 or pH 10.0.
- Power supply: international power adapter, input 100-240 VAC, 50/60 Hz, output 5 VDC 1.5 A. With interchangeable plugs type A (USA), C (Europe), G (UK), I (NZ). Replacement power adapter available separately.
- CE compliance: yes.
- FCC compliance: yes.
- RoHS compliance: yes.
- Other specifications: 2.4 GHz WLAN connection, WLAN protocol 802.11 b/g/n.
- Warranty: 2 years.
- Country of origin: New Zealand.
